Subject: Product Outage/Anomaly: N20 OMPS Table Load and Data Outage This is a multi-part message in MIME format. --------------37DA79AFECA843B31584C538 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit *Topic:*N20 OMPS Table Load and Data Outage Scheduled for May 24, 2018 *Date/Time Issued:*May 23 2018, 1920Z *Product(s) or Data Impacted:* Ozone Mapper Profiler Suite (OMPS) Products ** *Date/Time of Initial Impact:*May 24, 2018 1306Z ** *Date/Time of Expected End:*May 24, 2018 1918Z ** *Length of Outage:* Approximately 6 hours 13 minutes ** *Detail/Specifics of Change:*On May 24, 2018 at approximately 13:06:05 UTC, N20 will halt the current OMPS CBM (Command Block Memory) and begin OMPS special calibration test table updates. Note that OMPS will not begin producing nominal science data until after 19:18:44 UTC. While the calibration test is active, data will be invalid. On May 24, 2018 at approximately 18:15:16 UTC, N20 will halt the current OMPS CBM and will upload OMPS table updates restoring the instrument to its nominal state. OMPS will not produce valid science data from 13:06:05 UTC until 19:18:44 UTC. ** *Contact information for Further Information:* ESPC Operations at ESPCOperations@noaa.gov or 301-817-3880 *Web Site(s) for applicable information:* N/A This message was sent by ESPC.Notification@noaa.gov You have been sent this and other notifications because you have opted in to receive it. If for any reason, you wish to unsubscribe, please contact ESPC Help Desk at ESPCOperations@noaa.gov or 301-817-3880. Please note: it may take up to two business days to process your unsubscribe request. --------------37DA79AFECA843B31584C538 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit
Date/Time Issued: May 23 2018, 1920Z
Product(s) or Data Impacted:
Ozone
Mapper Profiler Suite (OMPS)
Products
Date/Time
of Initial
Impact:
May 24, 2018 1306Z
Date/Time
of Expected End:
May 24, 2018 1918Z
Length
of Outage:
Approximately 6 hours 13
minutes
Detail/Specifics of Change: On May 24, 2018 at approximately 13:06:05 UTC, N20 will halt the current OMPS CBM (Command Block Memory) and begin OMPS special calibration test table updates. Note that OMPS will not begin producing nominal science data until after 19:18:44 UTC. While the calibration test is active, data will be invalid. On May 24, 2018 at approximately 18:15:16 UTC, N20 will halt the current OMPS CBM and will upload OMPS table updates restoring the instrument to its nominal state. OMPS will not produce valid science data from 13:06:05 UTC until 19:18:44 UTC.